When Your Water Heater Suddenly Ceases Working: What to Do
When Your Water Heater Suddenly Ceases Working: What to Do
Blog Article
Just about everyone is bound to have their private assumption with regards to What Would Cause My Electric Water Heater to Stop Working?.
Lots of contemporary homes use an electric water heater for their furnace, as a result of its comfort and also ease of use. However, just like any other electric devices, troubles may arise with its usage, suddenly. It can be truly discouraging to awaken to a cool shower rather than a warm one or having your bath with water that isn't warm adequate or even too warm. Whatever the situation may be, water heater problems can be fairly aggravating. The good news is, we have actually made a checklist of possible services to your water heater concerns. There are a number of factors that might trigger much of these troubles, maybe a problem with the power supply, the electrical burner, or the thermostat. Before doing anything, guarantee you shut off the main power supply for safety and security. Whatever the problem is, getting it fixed need to not posture excessive of an issue if you follow these steps:
Examine Your Power Supply:
As fundamental as this may appear, it is extremely necessary. Without ample power, your water heater will not operate. So the first thing to do when your water suddenly stops working is to validate that it isn't a power trouble. Inspect if the fuse is blown out or the breaker stumbled. If the circuit breaker is the concern, simply turn it on and off again. Replace any kind of broken or damaged fuse. Test the home appliance with power after these changes to see if it's now working.
Inspect the Burner in the Water Heater:
If it's not a power issue, then try having a look at your burner if it is still working. Examine each of your burner to be sure the trouble isn't with any of them. If any one of them is faulty, replace that component and then inspect whether the warm water is back on.
Examine Your Thermostat:
If your water heater still isn't functioning or the water appearing isn't warm enough, you may require to examine the temperature settings on your upper thermostat. Make sure the breaker is switched off prior to doing anything. Open up the gain access to panel and press the red button for temperature reset over the thermostat. This must help heat up the water. Turn the breaker back on and check if the trouble has actually been settled.
Call An Expert:
If after replacing all malfunctioning components as well as resetting your temperature, the water heater still isn't functioning, you may require to call an expert plumber for a professional opinion. The problem with your heater could be that the hot and cold faucets have been switched over or it might be undersized for the quantity of warm water required in your house. Whatever the instance might be, a specialist plumber would help resolve the issue.
Final thought
Water heater problems are not always major. A number of them are because of minor concerns like a blown fuse or damaged heating element. Replacing the defective parts should do the trick. However, if you are still incapable to address the trouble, give a call to your local plumber ahead to get it dealt with.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Hopefully you enjoyed reading our post about How to Troubleshoot and Repair an Electric Water Heater. Thank you for taking the time to read our blog post. Those who appreciated our blog post if you please make sure you remember to share it. Many thanks for going through it.
Schedule Report this page